Education
MSc thesis project proposal

Phase-coded automotive radar

Topic: Feasibility study of an automotive radar with phase-coded waveforms

Project outside the university

NXP

Automotive radar penetration is expected to increase exponentially in the coming decade. Under these circumstances, interference between radar systems is likely to be become a practical problem. Spread spectrum techniques (phase-coded radars) promise to mitigate the effect of interferences; as of today, on the other hand, it is known that a large portion of these radars will operate with the fast-chirp-sequence technique. It is therefore important to quantify the problem of interference between fast-chirp-sequence radars, and to determine if and to what extent the use of spread-spectrum techniques can alleviate the interference problem. It is also relevant to determine if fast-chirp-sequence radars will (likely) migrate towards pure phase-coded systems in the future, or a hybrid solution combining fast-frequency chirps with phase coding is likely to become a next de-facto standard, as both fast-chirp and phase coding may have practical, complementary features.

In this thesis, a benchmark of phase-coded, fast-chirp sequence, and hybrid phase-coded/fast-chirp sequence will be presented. The work will deliver system models (for example in matlab) for estimation of the deleterious effect of interference from these type of systems into each other. An overview of phase-coded radar literature will be presented, and a complete signal path shall be proposed (e.g. dimensioning ADC sampling rate and ENOB requirement , BB signal processing implementation, etc.) The theoretical study will be complemented by practical validation on fast-chirp sequence, and possibly also on hybrid phase-coded/fast chirp sequence, hardware test set-up.

See details in PDF presentation

Contact

prof.dr. Alexander Yarovoy

Microwave Sensing, Signals and Systems Group

Department of Microelectronics

Last modified: 2017-03-28